|
|
ISO 9001:2000, Quality management systems -- Requirements
(more)
»rank: 217019
Editorial Product Review: :This International Standard specifies requirements for a quality management system where an organization: needs to demonstrate its ability to consistently provide product that meets customer and applicable regulatory requirements, and aims to enhance cust
Detailpage
|
|
ISO 6238:2001, Adhesives -- Wood-to-wood adhesive bonds -- Determination of shear strength by compressive loading
(more)
»rank: 642135
Editorial Product Review: :This International Standard specifies a method for determining the shear strength of wood-to-wood adhesive bonds, with a standard specimen loaded in compression and under specified conditions of preparation, conditioning and testing. This method is intended for testing only those adhesives used in bonding wood to wood. This title may contain less than 24 pages of technical content.
Detailpage
|
|
|
ISO 6237:2003, Adhesives - Wood-to-wood adhesive bonds - Determination of shear strength by tensile loading
(more)
»rank: 642136
Editorial Product Review: :ISO 6237:2003 specifies a method for determining the shear strength of wood-to-wood adhesive bonds, with a standard specimen loaded in tension and under specified conditions of preparation, conditioning and testing. This method is intended for testing only those adhesives used in bonding wood to wood in either parallel-laminated or cross-laminated construction. It is not intended for use in testing manufactured products. This title may contain less than 24 pages of technical content.
Detailpage
|
|
ISO 12124:2001, Acoustics -- Procedures for the measurement of real-ear acoustical characteristics of hearing aids
(more)
»rank: 720732
Editorial Product Review: :This International Standard specifies procedures and requirements for measuring the real-ear acoustical characteristics of hearing aids. Its purpose is to ensure that the same measurements made on a given hearing aid on a given human ear and a given hearing aid, following the procedures described and using equipment complying with the requirements of IEC 61669, give substantially the same results.Measurements of real-ear acoustical characteristics of hearing aids which apply non-linear or analytical processing techniques are valid ...
Detailpage
|
|
|
IEC 61669 Ed. 1.0 b:2001, Electroacoustics - Equipment for the measurement of real-ear acoustical characteristics of hearing aids
(more)
»rank: 720905
Editorial Product Review: :Specifies the general requirements for test equipment designed for use in measuring the real-ear acoustical characteristics of hearing aids and describes the terminology used. The purpose of this International Standard is to ensure that measurements of real-ear acoustical characteristics of a hearing aid on a given human ear, performed with different test equipment which comply with this International Standard using methods described in ISO 12124, shall give substantially the same results.
Detailpage
|
|
ISO 9906:1999, Rotodynamic pumps -- Hydraulic performance acceptance tests -- Grades 1 and 2
(more)
»rank: 865699
Editorial Product Review: :This International Standard specifies hydraulic performance tests for acceptance of rotodynamic pumps (centrifugal, mixed flow and axial pumps, hereinafter simply designated as 'pumps'). It is applicable to pumps of any size and to any pumped liquids behaving as clean cold water (such as defined in 5.4.5.2). It is neither concerned with the structural details of the pump nor with the mechanical properties of their components.This International Standard contains two grades of accuracy of measurement: grade 1 ...
Detailpage
|
|
|
ISO/TR 14969:2004, Medical devices - Quality mangement systems - Guidance on the application of ISO 13485: 2003
(more)
»rank: 1011538
Editorial Product Review: :This Technical Report provides guidance for the application of the requirements for quality management systems contained in ISO 13485. It does not add to, or otherwise change, the requirements of ISO 13485. This Technical Report does not include requireme
Detailpage
|
|
ISO 15007-1:2002, Road vehicles - Measurement of driver visual behaviour with respect to transport information and control systems - Part 1: Definitions and parameters
(more)
»rank: 1086910
Editorial Product Review: :This part of ISO 15007 defines key terms and parameters applied in the analysis of driver visual behaviour. It can be applied in environments from real-world trials to laboratory-based driving simulator studies.Minimum requirements for reporting the results of Transport Information and Control Systems (TICS) evaluations are provided.The procedures described in this part of ISO 15007 could also apply to more general assessments of driver visual behaviour without the introduction of TICS specific systems. The parameters and ...
Detailpage
|
|
|
ISO/TS 15007-2:2001, Road vehicles - Measurement of driver visual behaviour with respect to transport information and control systems - Part 2: Equipment and procedures
(more)
»rank: 1086911
Editorial Product Review: :This Technical Specification gives guidelines on equipment and procedures for analyzing driver visual behaviour, intended to enable assessors of Transport Information and Control Systems (TICS) toplan evaluation trials,specify (and install) data capture equipment, andanalyse, interpret and report visual-behaviour metrics (standards of measurement). It is applicable to both road trials and simulated driving environments. It is not applicable to the assessment of head-up displays.
Detailpage
|
|
ISO/TS 15000-5:2005, Electronic Business Extensible Markup Language (ebXML) - Part 5: ebXML Core Components Technical Specification, Version 2.01(ebCCTS)
(more)
»rank: 1118599
Editorial Product Review: :ISO/TS 15000-5:2005 can be employed wherever business information is being shared or exchanged amongst and between enterprises, governmental agencies, and/or other organisations in an open and worldwide environment. ISO/TS 15000-5:2005 will form the basis for standards development work of business analysts, business users and information technology specialists supplying the content of and implementing applications that will employ the UN/CEFACT Core Component Library (CCL). The Core Component Library will be stored in a UN/CEFACT repository and identified ...
Detailpage
|